When it comes to hardware computer repair and periodic maintenance there are a few things that can be done to ensure the PC stays operating in top form. Some routine steps include cleaning the system and hard drives. Additional repairs include replacing failed parts such as hard drives, motherboards, fans and video cards.
Internal components are known to last for a very long time if properly maintained and this means regular cleanings. Another way of maintaining a PC is keeping the hard drives defragmented by using the tools available in the operating system. Keeping the hard drive maintained will reduce the chances of it failing and causing repairs to be necessary.
Like so many other projects, removing the power source from the machine is the crucial first step. If memory fails then it will need to be removed and taken to an electronics store so a new one can be purchased. To do this, open the case after unplugging the power and locate the modules, they will have a clip on either end of the stick and by applying a little pressure they will release the stick.
If a hard drive fails, removing it is quite easy and is done by using a Philips head screwdriver. The first step is to open the case and unplug the power plug and drive cable by gently wiggling them free. If it is a newer desktop then the cables may be a bit different and are released by pushing a tab. Once power wires and cables are removed, use the screwdriver to remove the screws holding the drive and pull it free.
Motherboard replacements are a bit tricky and should be done by personnel that have experience in this field. If it is a video card that fails the procedure is to again open the case and remove the screw holding the card in place. If the card is an AGP model it will have a release clip at the rear of the card itself, push the clip or pull it and the card will come free.
Fans are bound to fail at one point or another and can be replaced very easily by removing four screws holding them in place. This is done after the power plug is disconnected in order to make sure there are no issues with power. When it comes to installing them the process is reversed and the screws are installed first then the power is plugged in.
To properly keep a PC maintained it is crucial to clean out any dust and debris at least one time every month. This will help to ensure the system does not overheat and the components will be able to work properly. Another trick is to keep the hard drive free of viruses and spyware, to do this a person can download programs that will run automatic scans on a hourly, daily, weekly and monthly basis.
Keeping up to date on hardware Computer repair and periodic maintenance is sure to help the system stay running in top condition. A PC is like a car and requires routine checkups and routine steps to properly maintain the working parts. Putting time and effort into processes such as these will help the PC to continue running the best it can.
Internal components are known to last for a very long time if properly maintained and this means regular cleanings. Another way of maintaining a PC is keeping the hard drives defragmented by using the tools available in the operating system. Keeping the hard drive maintained will reduce the chances of it failing and causing repairs to be necessary.
Like so many other projects, removing the power source from the machine is the crucial first step. If memory fails then it will need to be removed and taken to an electronics store so a new one can be purchased. To do this, open the case after unplugging the power and locate the modules, they will have a clip on either end of the stick and by applying a little pressure they will release the stick.
If a hard drive fails, removing it is quite easy and is done by using a Philips head screwdriver. The first step is to open the case and unplug the power plug and drive cable by gently wiggling them free. If it is a newer desktop then the cables may be a bit different and are released by pushing a tab. Once power wires and cables are removed, use the screwdriver to remove the screws holding the drive and pull it free.
Motherboard replacements are a bit tricky and should be done by personnel that have experience in this field. If it is a video card that fails the procedure is to again open the case and remove the screw holding the card in place. If the card is an AGP model it will have a release clip at the rear of the card itself, push the clip or pull it and the card will come free.
Fans are bound to fail at one point or another and can be replaced very easily by removing four screws holding them in place. This is done after the power plug is disconnected in order to make sure there are no issues with power. When it comes to installing them the process is reversed and the screws are installed first then the power is plugged in.
To properly keep a PC maintained it is crucial to clean out any dust and debris at least one time every month. This will help to ensure the system does not overheat and the components will be able to work properly. Another trick is to keep the hard drive free of viruses and spyware, to do this a person can download programs that will run automatic scans on a hourly, daily, weekly and monthly basis.
Keeping up to date on hardware Computer repair and periodic maintenance is sure to help the system stay running in top condition. A PC is like a car and requires routine checkups and routine steps to properly maintain the working parts. Putting time and effort into processes such as these will help the PC to continue running the best it can.
About the Author:
Specializing in Computer repair Ottawa, wireless network installation and on-site Montreal Computer repair services in Toronto and Montreal.
Sem comentários:
Enviar um comentário